 |
 |
TMNR-ME
series
|
|
 |
|
-
|
|
|
| ・ |
|
TMNR-*ME type Torque meter can measure
the torque from the geostationary axis
to the high-speed spindle by the double
bearing adoption. As the strength is higher
than the standard model (TMNR type) both
for radial and thrust, and a direct coupling
with a propeller shaft etc. are more possible
by making the bearing double. Because
the dropping lubricant method is assumed
to be a standard, the torque measurement
to which a heavy load hangs is possible.
(Please inquire for a grease lubrication
method.) |
| ・ |
|
It is possible to use it for the test
stand for not only the torque measurement
but also the instrumentation control field
, for instance, the car etc. because of
the efficient rotary transformer adoption.
|
| ・ |
|
Because the rotational speed can be
measured by installing the rotation detector(option),
the horsepower of the motor output etc.
can be measured. |
|
|
|
|
| Rated capacity |
±500 N･m~±5
kN･m |
| Safe overload |
120 %R.C. |
| Ultimate overload |
200 %R.C. |
| Rated output |
1.3 mV/V±0.26 mV/V |
| Accuracy of detected value |
±0.2 %R.O. (In case
of combination with Minebea’s Transmitter CSA?561)
(Linearity, hysteresis and repeatablity are included.) |
| Excitation, recommended |
4 VAC |
| Insulation resistance |
500 M-ohm or more (DC50 V)(between bridge and main body) |
| Temp. range, safe |
0 ℃ ~ 90 ℃ |
| Temp. effect on zero |
0.1 %R.O./10 ℃ |
| Temp. effect on output |
0.1 %LOAD/10 ℃ |
| Maximum rotation |
TMNR-500NME~2KNME : 10
000 rpm
TMNR-3KNME : 8 000 rpm
TMNR-5KNME : 6 000 rpm
(Maximum rotation is 3 000 rpm for the grease lubrication) |
| Zero shift by rotation |
0.2 %R.O. |
| Temperature rise by rotation |
40 ℃ or less / at the
maximum rotation(At the grease lubrication)
Double bearing side 60 ℃, Single bearing side 40
℃ or less
／at the maximum rotation (At the droping llubrication) |
| Cable |
φ10, 4 -cores shielded
cable (model : CAC-160-※M）
with the connector at the both ends.
(Cable is specified from 10 m, 20 m or 30 m) |
| ConnectorParts No. |
TC1108-12A10-7M10.0
PRC03-12A10-7M10.5 |
| Class of protection |
IP40 |
| Gear for rotation
detector |
S45C black coated
TMNR-500NME ~ 3KNME :
60-tooth, module 1, tooth width 10 mm
TMNR-5KNME :
120-tooth, module 1, tooth width 10 mm |
|
|
|
| Rotation detector(MP-981), Rotation detectorCable(MX-705) |
|
|
|
| Parts No. |
Rated capacity |
| TMNR-500NME |
500 N･m |
| TMNR-1KNME |
1 kN･m |
| TMNR-2KNME |
2 kN･m |
| TMNR-3KNME |
3 kN･m |
| TMNR-5KNME |
5 kN･m |
|
|
|
| CAD files (DXF) |
Specification sheet (PDF) |
Instruction manual (PDF) |
TMNR-500NME ~ 2KNME (182KB)
TMNR-3KNME (154KB)
TMNR-5KNM (152KB) |
No.232011
(55KB) |
KT60179-1 (244KB) |
Adobe Acrobat Reader is required to refer the Specification data sheet.
Acrobat Reader is a registered trademark of Adobe Systems Ltd.
The download of Adobe Acrobat Reader is here. |
|
| |
