PCB type Transmitter
CSA-592 for tie bar measurement system
E PCB type transmitter exclusiver use for tie bar gage.
ESuitable for the control of the mold tightening operation of the injection molding machine.
Bridge power supply
DC8 V}0.3
V within 30 mA
Applicable transducer
1 unit of tie-bar
gage(350 Άtype 2 pieces a couple)
Input range
}300 x10|6strain ~ }2 000
x10|6strain
Output voltage
}10 V output
Output load resistance
2 kΆ or more
Zero adjustment range
Coarse adjustment
Approx. }10 000 x10|6strain adjustable by 16 steps rotary
switch.
Fine adjustment Approx. }3 000 x10|6strain adjustable by
fine/coarse adjustment trimmer
Sensitivity adjustable
range
Coarse adjustment
Approx.}10 000 x10|6strain adjustable by 16 steps rotary
switch.
Fine adjustment
Adjustable by trimmer
Non-linearity
0.1 %F.S.
Temperature efficient
Zero }10 ΚV/ (Input
conversion) , Sensitivity }0.05 %F.S./
CALIB
300 x10|6strain }15 x10|6strain for 1 point
Frequency response range
Approx. 100 Hz, orApprox.
30 Hz (Selected by dip switch)
Operating temp./humidity range
0 ~ 50 ,
80 %RH or less ((Non condensing)
Power supply voltage
DC24 V (DC18 V ~ DC36V)
Power consumption
Approx. 0.15A (at24
V)
Outline dimensions(WxHxD)
160 x 110 x 20 (mm) (excludes protruding parts)
Weight
Approx. 0.5 kg
---
CAD files (DXF)
Specification sheet (PDF)
Instruction manual (PDF)
---
---
---
Adobe Acrobat Reader is required to refer the Specification data sheet.
Acrobat Reader is a registered trademark of Adobe Systems Ltd.
The download of Adobe Acrobat Reader is here.
