MINEBEA/Sensing Device BU English site Site Map Group site MinebeaMitsumi Inc. Sensing Device Business Unit
Products Topics Introduction Contact us
Home > Products > Testing Machine > TGE
Tensile and Compression Testing Machine

Technograph TGI series

Tensile and compression testing machine TGI series
Feature
  • New Desk-Top testing mashine with high accuracy, high performance, and simple operation.
  • ¡ High Accuracy
    Accuracy of }1 % (JIS Class 1) of the indicated value from 1/1 to 1/1000 of load cell capacity, accurac of }0.5% (JIS Class 0.5) is available as an option.
    Cross head speed range of 0.000 5 mm/min to 1 000mm/min (TGI-50kN to TGI-250kN : 0.000 5mm/min to 500mm/min).
    Accuracy of cross head speed is }0.1 % of speed setting over entire speed range.
    ¡   High performance with simple operatin.
    Automatic load cell span adjustment, One-push auto zero, Auto return to test start position (No overshooting), Test condition registration, Manual 3 level speed setting (freely settable), Analog output of test force and position, and support for continuous repeated tensile and compression testing.
    ¡   Increased accuracy, with servo motor resolution four times greater than previous models. Position control is greatly improved, allowing steady operation in low speed ranges.
    ¡   Increased return speed
    The return speed can be set as desired between 0.1 mm/min and 1500 mm/min (up to 10kN) and between 0.1 mm/min and 750mm/min (for 50kN and over).
  • Žd—l  
    Model TGI-250kN TGI-100kN TGI-50kN TGI-10kN TGI-5kN TGI-1kN TGI-500N TGI-200N
    Maximum test force 250 kN 100 kN 50 kN 10 kN 5 kN 1 kN 500 N 200 N
    Test force measure -ment range *1) 0.1N~
    250kN
    0.1N~
    100kN
    0.1N~
    50kN
    0.1N~
    10kN
    0.1N~
    5kN
    0.1N~
    1kN
    0.1N~
    500N
    0.1N~
    200N
    Test space Tensile / compression testing beneath the movable crosshead.
    (A model is available allowing tensile testing above the movable crosshead (Optional).)
    Loading method Constant-speed strain loading with highly accurate AC servo motor and backlash-free precise ball screw.
    Cross head speed / permissible test force Within the max. test force over the entire speed ranges.
    Test force range 2 methods:
    AUTO: (accuracy guranteed range: 1/1 to 1/250 of load cell capacity)
    100: (accuracy guranteed range: 1/100 to 1/1 000 of load cell capacity)
    Test force display 5-digits digital display ±99,999
    AUTO range: Resolution 1/5 000,
    Automatic switching of full scale display, decimal point position and display units in accordance with test force increase/decrease.
    100 range: Resolution 1/10000
    * Test force display varies depending on the load cell provided.
    Test force measuring accuracy (Guaranteed accuracy range) Standard accuracy : ±1 % of indicated value
    (1/1 to 1/1000 of load cell capacity)
    High accuracy : }0.5% of indicated valeu (Optional)
    (1/1 to 1/1000 of load cell capacity)
    * Test machine must be in location free of vibration
    Applicable standard JIS B 7721 Class 1 or Class 0.5 and ISO7500-1 Class 1 or Class 0.5
    Effective test width (Note 2) (mm) 600 600 420 430
    Cross head stroke (mm) 1 550 1 350 1 015 1 090
    Maximum mounting space (mm) 1 690 1 555 1 165 1 160
    Tensile stroke (Note 3) (mm) 620 850 470 710 820 870 890 910
    Crosshead speed 0.000 5 to 500 mm/min
    0.1 to 500 mm/min; can be set in 0.1 mm/min increments. Below this, can be set in 9 steps: 0.05, 0.03, 0.02, 0.01, 0.005, 0.003, 0.002, 0.001, and 0.0005.
    0.000 5 to 1 000 mm/min
    0.1 to 1 000 mm/min; can be set in
    0.1 mm/min increments.
    Below this, can be set in 9 steps: 0.05, 0.03, 0.02, 0.01, 0.005, 0.003, 0.002, 0.001, and 0.0005.
    Crosshead speed accuracy }0.1 % over entire speed range
    Return speed Can be set as required between 0.1 mm/min and 750 mm/min Can be set as required between 0.1 mm/min and 1 500 mm/min
    Speed setting method Manual: Numeric input via control panel
    When using data processing software: Automatically set in accordance with test conditions created.
    Manual speed 3 speeds (HIGH/MIDDLE/LOW); each freely settable
    Test mode Single and cycle (Combination of test force and position)
    Optional: Creep, Automatic loading
    Test force display 5 digit digital display }99 999
    Auto range: Resolution 1/5 000, test force reduction increase/decrease, full scale display, and automatic switching of decimal point position and display units
    100 range: Resolution 1/10 000 * Test force display varies depending on the load cell provided.
    Movable crosshead position display 6 1/2-digit digital display }1999.999
    Standard function
    Load cell model & capacity
    F
    Auto adjust
    Load cell span
    F

    Auto set for tension & compression

    Zero point
    F
    One push
    Position reset F One push
    Sample rupture detection
    F
    Selectable from stop, reverse and ignore
    Rupture sensitivity
    F
    Set as desired to 0.04 % to 99.00 % of test force
    Test condition registration function
    F
    10 conditions
    Test force & position analog output
    F
    DC0 ~ DC5 V (with scaling function)
    Interface
    F
    Conforms to USB interface 2.0/1.1 standard (B- type connector)
    Options
    Chuck adapter
    F
    Lower chuck mounting adapter for tensile testing
    Load cell
    F

    for tension / compression type
    (with universal joint, connect pin and compression plate
    ----------
    for tensile type
    (with universal joint and connecting pin)
    ----------
    for compression type
    (with for compression plate)

    Testing jig
    F
    Former jig is attachable.
    Displacement measuring function
    F
    Strain input type
    Test machine stand
    Data processing software
    F
    Standard (Tensile / compression / bending), Peeling, Cycle (One way, Both way),
    Stress relaxation
    External dimensions (WxHxD)(mm) 1420
    x 2406
    x 894
    1221
    x 2192
    x 720
    900
    x 1507
    x 490
    700
    x 1583
    x 523
    700 x 1 583 x 513
    (without level adjuster)
    Approximate weight (kg) 1 200 900 310 120
    Power supply voltage, Frequency 3-phase 200 VAC to 230 VAC+10 % to 15 %, 50/60 Hz Single phase 100 VAC to 115 VAC+10% to -15%, 50/60 Hz
    Power consumption (W) 7.5 k 2.9 k 1.8 k 750 400
    Operating temperature / humidity range Temperature 5 Ž ~ 40 Ž,
    Humidity 20 % ~ 80 %RH (Non condensing)
    • Note 1: Test force measurement range varies depending on the rated capacity of load cell used.
    • Note 2: Testing machines are available with large effective width for models with maximum test force of 50 kN, 100 kN or 250 kN.
      Note 3: Models are available with extended stroke.
    ƒ_ƒEƒ“ƒ[ƒh
    CAD data (DXF) Specification sheet iPDFj Instruction manual (PDF)
    ---
    TGI-50kN
    No.ENTGI4105-C (227KB)
    TGI-100kN
    No.ENTGI4111-B (225KB)
    ---
    Adobe Acrobat Reader is required to refer the Specification data sheet.
    Acrobat Reader is a registered trademark of Adobe Systems Ltd.
    The download of Adobe Acrobat Reader is here.