Home > Products > Testing Machine > TGE
Testing Machine

Technograph TGE series

TGE series
Feature
  • New Desk-Top testing mashine with high accuracy, high performance, and simple operation.
  • E High-accuracy
    Accuracy of }1 % (JIS Class 1) of the indicated value from 1/1 to 1/500 of load cell capacity; accuracy of }0.5 % (JIS Class 0.5) is available as an option.
    E   High performance and simple operation
    Automatic load cell span adjustment, One-push auto zero, Auto return to test start position (No overshooting), Test condition registration, Manual 3 level speed setting (freely settable), Analog output of test force and position, and support for continuous repeated tensile and compression testing.
    E  

    Light weight and compact

    50 kg lighter and 100 mm slimmer than previous model (Compared with TG-10kN)

Specifications  
Model TGE-250kN TGE-100kN TGE-50kN TGE-10kN TGE-5kN TGE-1kN TGE-500N TGE
-200N
Maximum test force 250 kN 100 kN 50 kN 10 kN 5 kN 1 kN 500 N 200 N
Test force measurement range (Note 1) 0.1 N ~ 250 kN 0.1 N ~ 100 kN 0.1 N ~ 50 kN 0.1 N ~ 10 kN 0.1 N ~
5 kN
0.1 N ~ 1 kN 0.1 N ~ 500 N 0.1 N ~ 200 N
Test space Tensile and Compression testing beneath the movable crosshead.
(An optional model is available allowing tensile testing above the movable crosshead.)
Loading method Constant-speed strain loading with high-accuracy AC servo motor and backlash-free precision ball screw
Crosshead speed/permissible test force Within the max. test force over the entire speed range.
Test force range Choice of ×1 (AUTO) and ×100 if load cell rated output is 3 mV/V; ×1 (AUTO) if load cell rated capacity is 20 N or less.
When ×1 (AUTO) is set: test force increase/decrease, full scale display,
and automatic switching of decimal point position and display units
Test force measuring accuracy ±1% of indicated value in range 1/1 to 1/500 of load cell capacity for both tensile and compression (A high-accuracy model with ±0.5% of indicated value is available as an option.)
Applicable standard JIS B 7721 Class 1 or Class 0.5 and ISO7500-1 Class 1 or Class 0.5
Effective test width (Note 2) (mm) 600 600 420 420
Cross head stroke (mm) 1 550 1 350 1 015 1090
Maximum mounting space (Note 3) (mm) 1 690 1 555 1 165 1 185
Tensile stroke (Note 4) (mm) 620 850 470 710 815 860 890 910
Crosshead speed 0.1, 0.5, 1 to 500 (can be set in 1 mm/min increments)
Crosshead speed accuracy ±0.5% of speed setting or ±0.0025 mm/min, whichever is larger
Speed setting method Manual: Numeric input via control panel (0.1, 0.5, 1 to 500 set in 1 mm/min increments)
When using data processing software: Automatically set in accordance with test conditions created.
Manual speed 3 speeds (HIGH/MIDDLE/LOW); each speed freely settable
Test mode Single and cycle (combination of test force and position) Optional: Creep, stress relaxation, automatic loading
Display 5-digit digital display ±99,999, able to display peak or rupture test force, position: 5 1/2 digital display ±1999,999
Standard functions
Load Cell model and capacity. : Auto adjust
Load Cell span : Auto set for tension/compression.
Load Cell Zero point : One push
Position reset : One push
Sample rupture detection : Selectable from stop, reverse and ignore
Rupture sensitivity : Set as desired to 0.04 % to 99.00 % of test force
Test condition registration function : 10 conditions
Test force & position analog output : 0 V to 5 V DC (with scaling function)
Interface : Conforms to USB 2.0/1.1 standard (B-type connector)
Options
Chuck adapter : Lower chuck mounting adapter for tensile testing
Load Cell : for tensile/compression type (with universal joint, connecting pin, and compression plate)
------------
for tensile type (with universal joint and connecting pin)
-------------
for compression type (with compression plate)
Test jig : Former jig is attachable.
Displacement measuring function : Strain input type
Test machine stand : TGE-M01 (for sitting work),
TGE-M02 (for standing work)
Contact I/O : Use for TGE-I/O air chuck cover
Data processing software : Standard (tensile/compression/bending), peeling, cycle (one way, both ways),
stress relaxation
External dimensions
(W x H x D) (mm)
1 400
x 2 450 x 894
1 221
x 2 192 x 720
900
x 1 522 x 490
660 x 1 592 x 503
Approximate weight (kg) 1 200 900 300 80
Power supply voltage, Frequency 3-phase 200 ACV}20 V, 50/60 Hz Single phase 100 VAC ~ 115 VAC, 50/60 Hz
Power consumption 7 kW 5 kW 1.5 kW 200 W
Operating temperature /humidity range Temperature 5 Ž ~ 40 Ž,
Humidity 20 % ~ 80 %RH (Non condensing)
  • Note 1: The test force measurement range varies depending on the rated capacity of the load cell used.
    Note 2: Testing machines are available with large effective width for models with maximum test force of 50 kN, 100 kN or 250 kN.
    Note 3: Models are available with extended stroke.
    Note 4: Tensile testing stroke is for maximum test force capacity load cell with the (optional) chuck mounted.
Download
CAD files (DXF) Specification sheet (PDF) Instruction manual (PDF)
TGE-10kN (769KB)
TGE-5kN (769KB)
TGE-1kN (768KB)
TGE-500N (769KB)
TGE-200N (769KB)
TGE-10kN
No.TGE4103 (67KB)
TGE-50kN
No.TGE4105 (257KB)
---
Adobe Acrobat Reader is required to refer the Specification data sheet.
Acrobat Reader is a registered trademark of Adobe Systems Ltd.
The download of Adobe Acrobat Reader is here.