Load Cell:Single point type for commercial scale U2D1 series/MINEBEA

Home > Products > Load Cell > Single point type for commercial scale > U2D1

U2D1 series

Mid capacity, tall profile. OIML approved.


Rated capacity	29.42 N{3 kgf}~980.7 N{100 kgf}
Safe overload	200 %R.C.
Ultimate overload	300 %R.C.
Rated output	2 mV/V±0.2 mV/V
Non-linearity	0.015 %R.O.
Hysteresis	0.015 %R.O.
Repeatability	0.02 %R.O.
Creep	0.02 %R.O./20 min (U2D1-3K : 0.03 %R.O./20 min)
Creep recovery	0.02 %R.O./20 min (U2D1-3K : 0.03 %R.O./20 min)
Excitation, recommended	12 V or less
Excitation, maximum	20 V
Zero balance	±0.1 mV/V
Input resistance	420 Ω(＋30 Ω, -20 Ω)
Output resistance	350 Ω±5 Ω
Insulation resistance	2 000 MΩ or more (DC50 V) (between bridge and main body)
Temp. range, compensated	-10 ℃ ~ 50 ℃
Temp. range, safe	-10 ℃ ~ 50 ℃
Temp. effect on zero	0.04 %R.O./10 ℃
Temp. effect on output	0.012 %LOAD/10 ℃
Cable	φ3.2, 4-cores shielded 30 cm cable directly attached. Cable end separated.
Class of protection	IP40
Material of element	Alluminium alloy
Durability	1 000 00 times with rated load applied.
Effect of eccentric load	- The maximum size of loading plate : 400 mm x 600 mm - The center of loading plate and also center of load cell should be the same position - Error is withing 0.02 %R.O. applied with 1/2 of rated capacity at the position of 150 mm of eccentricity.

Parts No.	Rated capacity

U2D1-3K	29.42 N {3 kgf}
U2D1-6K	58.84 N {6 kgf}
U2D1-10K	98.07 N {10 kgf}
U2D1-15K	147.1 N {15 kgf}
U2D1-20K	196.1 N {20 kgf}
U2D1-25K	245.2 N {25 kgf}
U2D1-50K	490.3 N {50 kgf}
U2D1-100K	980.7 N {100 kgf}

CAD files (DXF)

Specification sheet (PDF)

---

U2D1-3K (47KB)
U2D1-25K (47KB)
U2D1-100K (47KB)

U2D1-3K ~ 20K
No.K102903-2-F (53KB),
U2D1-25K ~ 50K
No.K104209-2-G (48KB),
U2D1-100K
No. K102907-2-C (48KB)

---

Adobe Acrobat Reader is required to refer the Specification data sheet.
Acrobat Reader is a registered trademark of Adobe Systems Ltd.
The download of Adobe Acrobat Reader is here.