Load Cell:Single point type for industrial weighing systems/MINEBEA

Home > Products > Load Cell > Single point type for commercial scale > C2G1 - A

C2G1-A series

Mid. capacity.
Suitable for thin weighing scale.
OIML certification & NTEP approved.


Rated capacity	58.84 N{6 kgf}~490.3 N{50 kgf}
Safe overload	150 %R.C.
Ultimate overload	200 %R.C.
Rated output	2 mV/V±0.2 mV/V
Non-linearity	0.015 %R.O.
Hysteresis	0.015 %R.O.
Repeatability	0.02 %R.O.
Creep	0.02 %R.O./20 min
Creep recovery	0.02 %R.O./20 min
Excitation, recommended	12 V or less
Excitation, maximum	20 V
Zero balance	±0.1 mV/V
Input resistance	420 Ω
Output resistance	350 Ω±5 Ω
Insulation resistance	2 000 MΩ or more (DC50 V) (between bridge and main body)
Temp. range, compensated	-10 ℃ to 50 ℃
Temp. range, safe	-10 ℃ to 50 ℃
Temp. effect on zero	0.04 %R.O./10 ℃
Temp. effect on output	0.012 %LOAD/10 ℃
Cable	φ3.2, 4-cores shielded 40 cm cable directly attached and cable ends is separated.
Class of protection	IP64
Material of element	Alluminium alloy
Durability	1 000 000 times with rated load applied
Effect of eccentric load	・ C2G1-6K to 35K - Size of loading plate is 300 mm x 300 mm at maximum. - The center of loading plate and the center of load cell should be the same position - Error is within 0.02 %R.O. applied with 1/2 of rated capacity at the position of 75 mm of eccentricity.

Parts No.	Rated capacity

C2G1-6K-A	58.84 N {6 kgf}
C2G1-10K-A	98.07 N {10 kgf}
C2G1-12K-A	117.7 N {12 kgf}
C2G1-15K-A	147.1 N {15 kgf}
C2G1-20K-A	196.1 N {20 kgf}
C2G1-25K-A	245.2 N {25 kgf}
C2G1-30K-A	294.2 N {30 kgf}
C2G1-35K-A	343.3 N {35 kgf}
C2G1-50K-A	490.3 N {50 kgf}

CAD files (DXF)

Specification sheet (PDF)

---

C2G1-*-A (70KB)

No.214022 (61KB)

---

Adobe Acrobat Reader is required to refer the Specification data sheet.
Acrobat Reader is a registered trademark of Adobe Systems Ltd.
The download of Adobe Acrobat Reader is here.