Load Cell:Force sensor/MINEBEA - Measuring components BU

Home > Products > Load Cell > Force sensor > FSU

FSU series

Aluminum single point load cell


Rated capacity	4.903 N{0.5 kgf}~49.03 N{5 kgf}
Safe overload	450 %R.C.
Ultimate overload	600 %R.C.
Rated output	0.5 mV/V±0.05 mV/V (FSU-0.5K : 0.5 mV/V±0.075 mV/V)
Non-linearity	0.1 %R.O.
Hysteresis	0.1 %R.O.
Repeatability	0.1 %R.O.
Creep	0.15 %R.O./20 min
Creep recovery	0.15 %R.O./20 min
Excitation, recommended	5 V or less
Excitation, maximum	8 V
Zero balance	±0.4 mV/V
Input resistance	340 Ω±50 Ω
Output resistance	340 Ω±50 Ω
Insulation resistance	1 000 MΩ or more (DC50 V) (between bridge and main body)
Temp. range, compensated	0 ℃ ~ 60 ℃
Temp. range, safe	-10 ℃ ~ 80 ℃
Temp. effect on zero	1 %R.O./10 ℃
Temp. effect on output	1 %LOAD/10 ℃
Lead wire	AWG30, 150 mm directly attached, cable end is separated
Class of protection	IP00
Material of element	Alluminium alloy
Durability	1 000 000 times with rated load applied.
Effect of eccentric load	- The center of loading plate and also the center of load cell should be the same position. - Error is within 0.8 %R.O. applied with 1/2 of rated capacity at the position of 50 mm of eccentricity.

Parts No.	Rated capacity

FSU-0.5K	4.903 N {0.5 kgf}
FSU-1K	9.807 N {1 kgf}
FSU-2K	19.61 N {2 kgf}
FSU-5K	49.03 N {5 kgf}

CAD files (DXF)

Specification sheet (PDF)

---

FSU-0.5～5K (32KB)

No.215220 (28KB)

---

Adobe Acrobat Reader is required to refer the Specification data sheet.
Acrobat Reader is a registered trademark of Adobe Systems Ltd.
The download of Adobe Acrobat Reader is here.