 |
 |
Compression type digital load cell DC002 series |
|
 |
|
|
-
|
|
|
| ■ |
|
Excellent noise tolerance
An amount of the lightening surge is increased by the internal measures parts |
| ■ |
|
High precision measurement can be performed by the excellent temperature compensation.
Temperature error is compensated by measuring the temperature at gage section with the internal temperature detecting part. |
| ■ |
|
CE mark applicable |
| ■ |
|
Approved OIML R60 class C6 |
| ■ |
|
Decrease the error factor with the use of an amplifier. |
| ■ |
|
Improvement of maintenance efficiency |
| ■ |
|
The calibration function of four corner adjustment, etc., is simplified by the use of a special indicator CSD-401. |
|
|
|
|
| Rated capacity |
10 ton ~ 40 ton |
| Safe overload |
150 %R.C. |
| Ultimated overload |
200 %R.C. |
| Rated output |
1 000 000 count±500 count |
| Non-linearity |
0.02 %R.O. |
| Hysteresis |
0.02 %R.O. |
| Repeatability |
0.01 %R.O. |
| Creep |
0.008 %R.O./30 min |
| Zero return |
0.008 %R.O./30 min |
| Power supply voltage |
DC7.5 V ~ DC15 V |
| Power consumption |
DC35 mA (at DC12 V of power supply) |
| Insulated resistance |
100 MΩ以上 (DC50 V) |
| Degital output |
|
| Signal |
Differential signal(Conforming to RS-485) |
| Data output frequency |
160 times/s at maximum |
| Baud rate |
57 600 bps |
| Data bit length |
7 bit |
| Parity bit |
Odd |
| Stop bit |
1 bit |
| Terminator |
CR |
| Transmission method |
Half duplex |
| Synchronous method |
Start-stop synchronization |
| Address |
0 ~ 9 |
| No. of Connectable unit |
Up to 8 units |
| Transmission data |
ASCII Code |
| Temp. range, compensated |
−10 ℃ ~ 50 ℃ |
| Temp. range, safe |
−20 ℃ ~ 70 ℃ |
| Temp. effect on zero balance |
0.013 %R.O./10 ℃ |
| Temp. effect on output |
0.010 %LOAD/10 ℃ |
| Standard function |
Digital filter, Stabilization filter, A/Z, A/Z OFF |
| Cable |
φ7, 4-cores shielded 12 m cable and cable end is separated.
(DC002-40T : 15 m cable) |
| Protection class |
IP68 |
| Material of element |
Alloy steel |
| Material of cover |
Stainless steel (lost wax) |
| Weight |
Approx. 4.0 kg (DC002-10T ~ 30T), Approx. 6.5 kg (DC002-40T) |
| Accessory |
Guide ring, Inspection data sheet |
|
|
|
|
|
| Parts No. |
Rated capacity |
| ＤC002-10T |
10 ton |
| ＤC002-20T |
20 ton |
| ＤC002-25T |
25 ton |
| ＤC002-30T |
30 ton |
| ＤC002-40T |
40 ton |
|
|
|
| |
