Square Beam Type Load Cell C2B1:Compression type for industrial weighing systems/MINEBEA

Home > Products > Load Cell > Compression type for industrial weighing systems > C2B1

- Compression Type
- Tension Type
- Single Point Type
- Force Sensor
- Special Application Usage
- Mounting Attachment
- Selected by Rated Capacity

Square beam type C2B1 series

High precision, hermetically sealed all stainless steel load cell


Rated capacity	2.452 kN {250 kgf} ~ 39.23 kN {4 tf}
Safe overload	150 %R.C.
Ultimate overload	200 %R.C.
Rated output	2 mV/V±0.002 mV/V (C2B1-250K : 1 mV/V±0.001 mV/V)
Non-linearity	0.05 %R.O.
Hysteresis	0.05 %R.O.
Repeatability	0.025 %R.O.
Creep	0.03 %R.O./20 min
Creep recovery	0.03 %R.O./20 min
Excitation, recommended	12 V or less
Excitation, maximum	20 V
Zero balance	±0.02 mV/V
Input resistance	350 Ω±5 Ω
Output resistance	350 Ω±5 Ω
Insulation resistance	2 000 MΩ or more (DC50 V) (between bridge and main body)
Temp. range, compensated	-10 ℃ ~ 70 ℃
Temp. range, safe	-20 ℃ ~ 80 ℃
Temp. effect on zero	0.05 %R.O./10 ℃ (C2B1-250K : 0.10 %R.O./10 ℃)
Temp. effect on output	0.02 %LOAD/10 ℃
Cable	φ4.7, 4-cores shielded 6 m cable directly attached Y-crimp type terminal lugs are attached at cable end.
Class of protection	IP67
Material of element	Stainless steel
Durability	1 000 000 times with rated load applied.

Bearing plate, Rocker pin, Mounting attachment with slide-stop mechanism(Rocker Pin type : RCA-C2B1-*-S)

Parts No.	Rated capacity

C2B1-250K	2.452 kN {250 kgf}
C2B1-500K	4.903 kN {500 kgf}
C2B1-1T	9.807 kN {1 tf}
C2B1-2T	19.61 kN {2 tf}
C2B1-3T	29.42 kN {3 tf}
C2B1-4T	39.23 kN {4 tf}

CAD files (DXF)

Specification sheet (PDF)

Instruction manual (PDF)

C2B1-250K ~ 1T(29KB)
C2B1-2T ~ 4T (29KB)

No.KT51880-2 (59KB)

No.ENKT60242-1 (58KB)

Adobe Acrobat Reader is required to refer the Specification data sheet.
Acrobat Reader is a registered trademark of Adobe Systems Ltd.
The download of Adobe Acrobat Reader is here.