Home > Products > Digital Indicator > CSD - 401

Digital Indicator

Digital indicator for digital load cell CSD-401

Digital indicator CSD-701B
Feature
E   Up to 8 units of digital load cell are connectable.
E   Compact size 96 mm x 48 mm.
E   Equipped with RS-232C as a standard.
E   Protection grade : IP65 or equivalent
Specifications
Bridge power supply DC12 V}0.3 V within 280 mA
Applicable transducer Up to 8 units of Minebea's digital load cells are connectable.
Input interface RS-485 (2-wires method)
Baud rate 56 700 bps
Termination Externally *Terminating resistance must use 120 ohms.
Digital display range - 99 999 ~ 99 999 (Changeable to x2, x5, x10, x20 or x50)
Display unit 7 segment red LED with 14.2 mm character height.
Over display '-OL' display at minus(-) over, and 'OL' display at plus(+) over
A/D value over display '-OVF' display at minus(-) over, and 'OVF' display at plus(+) over.
Status display STAB, TARE, GROSS, NET, ZERO, HOLD
Judgement display S1, S2, S3, S4, S5
Display rate 15 times/s (Changeable to 5 times/s.)
Display of decimal point Changeable to no display, 101, 102, 103, 104.
External control function ON/OFF, SET, TARE, NET/GROSS, ZERO, PRINT, NET display, HOLD display.
Comparator function  
Display range -99 999 ~ 99 999
(0 ~ 99 999 for flow mode and discharge mode.)
No.of set points 5 points of S1, S2, S3, S4 and S5.
Set value of hysteresis data width 0 ~ 99 digit
Hysteresis direction Changeable to either 'On-delay' or 'Off-delay'
Comparator conversion rate Changeable to 5 times/s or 15 times/s.
(Synchronized with display rate.)
RS-232C interface Baud rate : Selectable from 1 200 bps, 2 400 bps, 4 800 bps or 9 600 bps.
Data bit length : Selectable from 7 bit or 8 bit.
Parity bit : Selectable from none, even or odd.
Stop bit : Selectable from 1 bit or 2 bit.
Terminator : Selectable from CR + LF or CR.
Communication method : Half duplex
Synchronous method : Start-stop synchronous method
Transmission data : ASCII code
Cable length : Upto 15 m
Signal name : TXD, RXD, COM.1
Operating temp./humidity range Temperature - 10 ~ 50
Humidity 85 % or less (Non condensing)
Power supply 100 VAC ~ 240 VAC (85 VAC ~ 264 VAC) 50/60 Hz
Power consumption Approx. 13 VA (without any options at 100 VAC )
Approx. 15 VA (with options at 100 VAC)
Weight Approx. 0.3 kg (without options)
Dimension (W x H x D) 96 mm x 48 mm x 120 mm
Protection code IP65 or equivalent (Only for the fron panel when the attached panel mounting gascket is installed.
Options
Current output, Voltage output, BCD output, RS-422/RS-485 interface, Serial interface
Download
CAD files (DXF) Specification sheet (PDF) Instruction manual (PDF)
CSD-401 (744KB) No.EN382401 (104KB) No.EN294-1366 (1,468 KB)
Adobe Acrobat Reader is required to refer the Specification data sheet.
Acrobat Reader is a registered trademark of Adobe Systems Ltd.
The download of Adobe Acrobat Reader is here.