 |
 |
Digital transmitter CSD-594 |
|
 |
|
-
|
|
|
| ■ |
|
Compact size, High speed digital output (Baurd rate : 921.6 kbps) |
| ■ |
|
The parallel connection is possible by 16 or less. |
|
|
|
|
| Bridge power supply |
DC5 V±0.25 V, within 45 mA |
| Measuring target |
Vector sensor |
| Input range |
Fx / Fy : ±300 x10－6strain ~ ±5 000 x10－6strain
Fz : ±300 x10－6strain ~ ±1 000 x10－6strain |
| Adjustment range of zero point |
±100 % of the rated output of the vector sensor |
| Digital output |
Serial data (Differencial output) |
| Non-linearity |
±0.05 %F.S. |
| Temp. characteristics |
Zero point ±2 μV/℃
Sensitivity ±0.05 %/℃ |
| Frequency response |
Approx. 100 Hz |
| Specification of the interface |
RS-485 conforming (RS-422 conforming is selectable by the order.)
Baud rate : 921.6 kbps
Data bit length : 8 bit
Parity bit : No
Start bit : 1 bit
Stop bit : 1 bit
Transmittion method : Half duplex
Address : 0 ~ F (Numbers of connection for sleeve : 16 at max.)
Internal termination
(Presence has been selected by the terminal block connection.)
Response : Approx. 0.5 ms (Master -> Sleeve -> Master) |
| Command |
Measuring mode : Start of data output, Stop of data output, A/Z, A/Z OFF
Function mode : Filter setting, Polarity change of output
Parameter mode : Load range, Address registration
Calibration mode : Calibration of each rectilinear force for Fx, Fy and Fz at zero and span. |
| Operating temp. / humidity range |
-10 ℃ ~ 50 ℃, 85 %RH r less (Non condensing |
| Power supply |
DC5 V (DC4.8 V ~ 5.5 V), Approx. 2.5 Ｗ or less (at DC5 V)
|
| Outline dimensions |
W:60 x D:80 x H:30 mm |
| Weight |
Approx. 220 g |
|
|
|
|
|
| CAD files （DXF） |
Specifications (PDF) |
Manual (PDF) |
| --- |
No.382594
(134KB) |
EN294-1333 (417KB) |
Adobe Acrobat Reader is required ~ refer the Specification data sheet.
Acrobat Reader is a registered trademark of Adobe Systems Ltd.
The download of Adobe Acrobat Reader is here. |
|
| |
